Home > CAN Hardware > CAN I/O Nodes >

PCAN-MicroMOD Evaluation Kit 2
CAN I/O node
Alternative Views:

PCAN-MicroMOD Evaluation Kit 2, IPEH-002079

Our Price:

Availability: Orders placed by 3pm Pacific usually ship same day

Description Technical Specs Downloads

Develop your own CANbus Network! Everything you need to develop a CAN I/O Device interface, and network your device via CANbus to a PC. Includes a PCAN-USB Adapter CAN interface, a MicroMod Evaluation Board, a MicroMod CPU Board, power adapter, CAN cable (3 ft.) and the PEAK Product DVD with MicroMod Configuration Software. The MicroMod CPU is a small (32 x 36 mm) module for OEM designs, it requires a single regulated 5 VDC power supply. The integrated firmware allows for simple configuration of the module with the FREE Windows configuration software. No embedded programming skills are required. The configuration data is sent to the module via CAN. Up to 32 MicroMods can be integrated in a single CAN network. Each individual module can be addressed over the bus enabling to read, modify and store its configuration data.

The included Windows software makes the following module configuration options available to the user: The digital input levels can send periodically or following a signal level transition (rising edge, falling edge or both transitions). Digital inputs can be logically connected (AND, OR, XOR, NAND, NOR, XNOR). The results are then displayed on the desired digital outputs and/or sent over the CAN bus. Analog values can be converted by Scale-value and Offset-value and then processed further. Adaptation of analog values is possible via characteristic curves. Direct conversion of analog inputs to CAN-IDs is supported. The rotary-switches (based on the rotary-encoder principle), which are standard in automotive applications, are supported directly.


Evaluation Board:

  • Open-collector output driver for digital outputs and CMOS PWM outputs
  • Protected digital inputs + LED
  • 4 potentiometers for analog inputs
  • Low pass and resistive divider for voltages > 5 V
  • Serial interface for firmware updates
  • Optional Low-speed CAN transceiver
  • Dimensions: approx. 100 x 100 mm
  • Part # IPEH-002082


  • Subminiature dimensions (32 x 36 mm)
  • Fujitsu MB90-F497 CAN controller
  • 8 x analog inputs, 10-bit, Vref 5V
  • 8 x digital inputs
  • 8 x digital outputs
  • 4 x PWM/frequency outputs, range 1 Hz to 20 KHz
  • Maximum of 32 MicroMods in one CAN network
  • Configurable via software for Windows® 8,7/Vista/XP (32/64-bit)
  • Part # IPEH-002080

Configuration software:

  • Periodic and edge-triggered sending of CAN messages
  • Logical linking of digital inputs
  • Direct conversion from analog inputs to CAN IDs
  • Analogue values can be processed using characteristic curves or hysteresis function
  • Direct evaluation of rotary encoders

PCAN-USB Adapter:

  • Interface in compact plastic casing
  • Transfer rates up to 1 Mbit/s
  • Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
  • CAN bus connection via D-Sub, 9-pin (to CiA® 102)
  • NXP SJA1000 CAN controller, 16 MHz clock frequency
  • 82C251 CAN transceiver
  • Hardware can be reset via software
  • 5-Volts supply to the CAN connection can be connected through a solder jumper, e.g. for external transceiver
  • Voltage supply through USB bus
  • Non-optically isolated version, part # IPEH-002021

CAN Cable:

  • PCAN Cable 2 with 120 Ohm terminating resistors
  • Part # IPEK-003001

Related Products
PCAN-MicroMod Digital 1 PCAN-MicroMod PCAN-USB Adapter PCAN-MicroMod Digital 2

Our Price:

Our Price:

Our Price:

Our Price:
PCAN-MicroMod circuit board PCAN MicroMod CAN I/O Node CAN bus to USB Adapter with cable no optical isolation PCAN-MicroMod circuit board
PCAN-MicroMod Analog 1 PCAN-MicroMod Mix1 PCAN-MicroMod Mix 2

Our Price:

Our Price:

Our Price:
PCAN-MicroMod circuit board in aluminum housing PCAN-MicroMod circuit board PCAN-MicroMod circuit board in aluminum housing