Home > Gateways & Routers >

PCAN-LIN Interface (low-speed)
PCAN-LIN CAN-to-LIN Interface
Alternative Views:

PCAN-LIN Interface (low-speed CAN), IPEH-002028

Our Price: $355.00
Sale Price: $325.00
Savings: $30.00

Availability: Orders placed by 3pm Pacific usually ship same day

Description Technical Specs Downloads
The PCAN-LIN module enables users to communicate over CAN, LIN and serial interface. The module is supplied in a plastic casing. The included firmware enables data exchange between the different bus systems, while configuration software allows setup of different operational modes. For instance, when configured as a LIN master, the PCAN-LIN can request data and send the incoming LIN data to the CAN bus and/or the serial interface. The default bit rate for LIN is 19200 bps. CAN data are directly routed to LIN without offset (offset 0). The Low Speed version has a max CAN speed of 125 kbps.
  • Sending/receiving LIN 1.x and 2.0 frames
  • The standard bit rate is set to 19200 bit/s for LIN and to 500 kbit/s for CAN
  • Electrical decoupling available between RS-232 and CAN/LIN (maximum 1 kV, optional)
  • Available for use as LIN slave or master / slave
  • General-purpose gateway (or router when using Acceptance Code / Acceptance Mask feature) from:
    • RS-232 to LIN (and back)
    • CAN to LIN (and back)
    • RS-232 to CAN (limited bandwidth)
  • Individual LIN frames can be initiated via CAN or RS-232
  • Processing a user-definable LIN-ID list (scheduler with limited number of entries, cyclic handling if required)
  • Voltage supply 8 - 18 V
  • Optional simulation of LIN slaves. Data can be changed via CAN frames (firmware must be modified)

Related Products
PCAN Cable 2 w/ 120 Ohm termination PCAN-USB Adapter

Our Price:

Our Price:
PEAK PCAN-Cable 2 CAN bus to USB Adapter with cable no optical isolation