Home > Gateways & Routers >

PCAN-LIN Interface (high-speed/iso)
PCAN-LIN CAN-to-LIN Interface
Alternative Views:

PCAN-LIN Interface (high-speed CAN/iso), IPEH-002029

Our Price: $429.00
Sale Price: $399.00
Savings: $30.00

Availability: Orders placed by 3pm Pacific usually ship same day.

Description Technical Specs Downloads
The PCAN-LIN module enables users to communicate over CAN, LIN and serial interface. The module is supplied in a plastic casing. The included firmware enables data exchange between the different bus systems, while configuration software allows setup of different operational modes. For instance, when configured as a LIN master, the PCAN-LIN can request data and send the incoming LIN data to the CAN bus and/or the serial interface. The default bit rate for LIN is 19200 bps. CAN data are directly routed to LIN without offset (offset 0). The default bit rate for CAN is 500 Kbps. The High Speed version with optical isolation has a max CAN speed of 1 Mbps with galvanic isolation between RS-232 and LIN/CAN of up to 1 kV.
  • Sending/receiving LIN 1.x and 2.0 frames
  • The standard bit rate is set to 19200 bit/s for LIN and to 500 kbit/s for CAN
  • Electrical decoupling available between RS-232 and CAN/LIN (maximum 1 kV, optional)
  • Available for use as LIN slave or master / slave
  • General-purpose gateway (or router when using Acceptance Code / Acceptance Mask feature) from:
    • RS-232 to LIN (and back)
    • CAN to LIN (and back)
    • RS-232 to CAN (limited bandwidth)
  • Individual LIN frames can be initiated via CAN or RS-232
  • Processing a user-definable LIN-ID list (scheduler with limited number of entries, cyclic handling if required)
  • Voltage supply 8 - 18 V
  • Optional simulation of LIN slaves. Data can be changed via CAN frames (firmware must be modified)

Related Products
PCAN Cable 2 w/ 120 Ohm termination PCAN-USB Adapter

Our Price:

Our Price:
PEAK PCAN-Cable 2 CAN bus to USB Adapter with cable no optical isolation