Home > CAN Hardware > CAN Data Logger >

Kit Kvaser Memorator Professional (+Linx) HS/J1587
Kit Kvaser Memorator Professional + Linx J1587 USB Interface KV-00383-5
Alternative Views:

Kit Kvaser Memorator Professional + Linx J1587, KV-00383-5
Our Price: $1,600.00

Availability: Usually Ships in 24 Hours

Description Technical Specs Downloads
This Kit includes both the Kvaser Memorator Professional (KV-00351-4) and the Kvaser Linx J1587 (KV-00389-7) which provides the user with a J1587 data logging solution. The Kvaser Memorator Professional HS/HS is a two channel, high performance, CAN bus interface and standalone Datalogger. Standalone mode logs data to an expandable SD card slot; interface mode connects to the PC with USB2.0. With the combined functionality of a standalone Datalogger and USB Interface, the Memorator Professional contains an advanced set of features: Message Filtering, Triggers, Error Detection Mode, Battery Backup, an expandable SD Card slot, Linx J1587 compatible, Auto Transmit, Galvanic Isolation, and much more. Configurable using Kvaser's included Memorator Tools software.

Kvaser Linx is a single channel, add-on cable that provides access to a J1587 bus network. It connects to your existing Kvaser CAN interface or datalogger in series. Compatible with any Kvaser CAN HS device.
Kvaser Memorator Professional Quick Start
Quick Start Guide for all Kvaser products

Kvaser Memorator Professional

    Triggers and Data Logger capabilities

  • Kvaser Memorator can log continuously, or logging can be triggered by creating advanced triggers based on messages, data signal values, error messages, external trigger's falling or rising edge, and I/O signals.
  • Pre- and post-triggers are available without buffer size restrictions, limited by disk space only
  • Handles up to 20 000 msgs/s in standalone logger mode
  • Transmit messages to the bus network
  • External digital output that can drive a LED or a buzzer
  • < 250 ms boot up time
  • Supports Silent Mode - log bus traffic safely without interfering and "listen-only" mode for bus analysis tools
  • Filters

  • Kvaser Memorator Professional can filter out selectable messages and/or signals to be logged. The identifiers can be picked from a database, or all messages can be logged.
  • Support for pass as well as stop filters
  • Create a counting pass filter to have a message logged at enumerated occurrence
  • Memory cards and functions

  • Standard MMC or SD type flash memory cards can be used - up to 2GB
  • Support for 16GB SDHC cards. Larger SDHC cards supported in the future - up to 32GB.
  • Set up several devices in a daisy chain for larger logging capacity.
  • Transfer recorded data over the USB interface at 1.4 MB/s or an SD card reader at 15 MB/s
  • Configuration software in the PC

  • Easy to use graphic configuration tool - Kvaser Memorator Professional Setup Tool
  • Configuration of the CAN controller, i.e. bit rate and filters
  • Configuration of the trigger conditions
  • Configuration of filter for messages to be stored
  • Configuration upload and download via USB
  • Using the included Kvaser Dispatcher software, a complete measurement setup can be turned into a self-installing package that is sent to a remote location to carry out a specific logging task.
  • Major features of Kvaser Memorator

  • One device for desktop and laptop
  • Functionality of a standalone CAN bus data logger and a USB CAN bus interface in a single device
  • Support for Kvaser Linx J1587
  • Driver support for major operating systems
  • Quick and easy plug-and-play installation
  • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B) identifiers
  • CAN messages are time-stamped with 2 microseconds resolution
  • Large on-board RAM buffer for CAN messages
  • 100% compatible with applications written for Kvaser Leaf, LAPcan, PCIcan, PCcan, USBcan, etc., with Kvaser's CANlib
  • Two CAN connections ISO-11898-2 high-speed, 10 kbit/s up to 1 Mbit/s
  • Galvanic isolation to protect the hardware
  • 130mA current consumption
  • Operating temperature range from -40 to + 85 C
  • Power from CAN bus or from the USB side
  • Built-in real time (calendar) clock with battery backup
  • Logger status is indicated with five externally visible LEDs
  • Plastic housing with dimension W*L*H about 50*90*25 mm (circa 2 x 3,5 x 1 inch)

Kvaser Linx J1587

  • Works with any Kvaser CAN HS interface
  • Create software applications with the included J1587 library
  • Supports data logging with the Kvaser Memorator Professional
  • Log both CAN and J1587 data simultaneously
  • Trigger on J1587 MID, PID, etc.
  • Molded 9 pin DSUB female connector with thumbscrews
  • Molded 9pin DSUB male connector
  • Compact plastic housing

Related Products
Kvaser Memorator Professional HS/HS CAN Datalogger Kvaser Memorator HS/SWC CAN Datalogger Kvaser Linx J1587 Kvaser Memorator HS/HS CAN Datalogger
Our Price: $1,399.00
Our Price: $1,240.00
Our Price: $329.00
Our Price: $1,240.00
Kvaser Memorator Professional HS/HS CAN Data Logger KV-00351-4 Kvaser Memorator HS/SWC CAN Data Logger KV-00234-0 Kvaser Linx J1587 CAN Cable KV-00389-7 Kvaser Memorator HS/HS CAN Data Logger KV-00175-6
Kvaser Memorator Light HS CAN Datalogger
Our Price: $550.00
Kvaser Memorator Light HS CAN Data Logger KV-00513-6