Home > PC-CAN Interfaces > Other Interfaces >

PCAN-Repeater
PCAN-Repeater, Isolated CAN Repeater
 
Alternative Views:


PCAN-Repeater (2-channel, iso), IPEH-004038
Our Price: $279.00

Availability: Orders placed by 3pm Pacific usually ship same day.
Qty:

Description Technical Specs Downloads
 
The PCAN-Repeater made by PEAK System Technik creates a connection between two high-speed CAN busses with galvanic isolation of up to 5 kV. Each CAN channel is decoupled from the other and from the power supply. CAN messages are forwarded 1:1 between the two channels and may be forwarded uni-directionally if required. The current bus status is displayed by means of LEDs. With its extended temperature range support and DIN rail housing, this CAN Repeater is suitable for use in an industrial environment.
Features
  • Two High-speed CAN channels (ISO 11898-2)
  • Galvanic isolation rated up to 5 kV according to IEC60601-1, between both CAN channels and between CAN and power supply
  • Bit rates up to 1 Mbit/s
  • NXP PCA82C251 CAN transceiver
  • LEDs display CAN bus load and CAN errors
  • Each CAN channel can be selectively terminated
  • Listen-only mode for CAN channel 1 or CAN channel 2 can be switched selectively
  • Plastic casing (width: 22.5 mm) for mounting on a DIN rail
  • 3 mating connectors for power supply and CAN connections
  • Extended operating temperature range from -40 to 85°C (-40 to 185°F)

Please note

Due to the CAN protocol, the maximum length of a CAN bus depends on the bit rate. Therefore, a bus cannot be extended with the PCAN-Repeater.

The physical total length of the CAN bus is reduced with each built-in PCAN-Repeater according to its signal delay.


Related Products
PCAN-Router - opto decoupled w/D-Sub PCAN-Router DR PCAN-Router Pro PCAN-USB Pro Adapter
Our Price: $372.00
Our Price: $299.00
Our Price: $689.00
Our Price: $675.00
PCAN-Router w/ D-Sub PCAN-Router DR, programmable high-speed CAN bus router 4 channel CAN bus router PCAN-USB Pro Adapter CAN/LIN-to-USB Interface IPEH-002061