Chat with us, powered by LiveChat Skip to content

Optical CAN Bus Adapter (PCAN-Optoadapter)

SKU #: IPEH-002038

This item is currently out of stock. Expected ship date is 4/1/24. We are accepting pre-orders.

The PCAN-Optoadapter is a universal plug-in adapter to allow galvanic isolation of High-speed CAN bus systems.

Its integrated logic means that decoupling can be installed at any point in the CAN network.
  • Plug-in adapter for decoupling a CAN bus networks
  • Galvanic isolation by DC/DC converters up to 500 V
  • Bit rates from 5 kbit/s up to 1 Mbit/s
  • High-speed CAN transceiver NXP PCA82C251
  • CAN bus connection via D-Sub, 9-pin (in accordance with CiA® 102)
  • LED for status indication of the supply voltage
  • 120 Ohm bus termination
  • Power supply (5 V) through pin 1 of the High-speed CAN connection. Nearly all CAN interfaces by PEAK-System can provide the required supply
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
  • Suitable for the use in CAN FD buses with data bit rates up to 2 Mbit/s and nominal bit rates up to 1 Mbit/s
Female D-Sub Connector
Pin assignment
1 5V Power supply
2 CAN-L
3 GND
4 Not connected
5 Not connected
6 GND
7 CAN-H
8 Not connected
9 Not connected
Male D-Sub Connector
Pin assignment
1 Not connected
2 CAN-L
3 GND
4 Not connected
5 Not connected
6 GND
7 CAN-H
8 Not connected
9 Not connected
PCAN-Optoadapter manual
PDF Manual in English
This item is currently out of stock. Expected ship date is 4/1/24. We are accepting pre-orders. The PCAN-Optoadapter is a universal plug-in adapter to allow galvanic isolation of High-speed CAN b...