Kvaser Memorator is a dual channel CAN bus
interface as well as standalone CANbus data logger. When operated in stand-alone mode this device logs data to an SD card (128 MByte card included). In CAN interface mode the Memorator connects to the PC with USB 1.1 port (USB 2.0 compatible). The first CAN channel is always for high-speed CAN connection, while the second CAN channel in this configuration is for a single-wire CAN interface. Alternatively the second CAN channel can be a low-speed CAN
) or a second high-speed CAN port (part# KV-00175-6
The Kvaser Memorator features a USB connection and can be used as a powerful
CAN to USB interface (like the Kvaser
USBcan II Adapter
as well as a
standalone CAN data logger - two products in one! Its compact design
makes this device an ideal flight recorder for example when used as a
data logger. Device configuration is performed via a user-friendly
configuration program and configuration data is stored on the unit's
Kvaser Memorator Functions:
Kvaser Memorator can log continuously, or logging can be triggered by external triggers (rising or falling edge) and/or by messages and signals on the CAN bus (triggered by identifier, or data contents.) Pre- and post-triggers are available.
To enhance logging performance, Kvaser Memorator can filter out selectable messages to be logged. The identifiers can be picked from a database, or all messages can be logged.
Standard MMC or SD type flash memory cards can be used. Larger memory cards, up to 1 GB, can be used. See our support pages for more information.
Configuration software in the PC:
- Configuration of the CAN controller, i.e. bit rate and filters
- Configuration of the trigger conditions
- Configuration of filter for messages to be stored
- Configuration upload and download via USB
Quick Start Guide for all Kvaser products