The CANopen DeviceExplorer is a versatile tool for
development, testing, diagnostics and service tasks. It provides CANopen master
functionalities and allows the analysis and configuration of CANopen devices.
Information about each CANopen device are read from the electronic data sheet
of the device (EDS or XDD format), or they can be scanned directly from the
device. Using standardized device configuration files (DCF) device
configurations can be saved or imported. Additionally, data of entire CANopen
networks can be stored in project files.
The CANinterpreter, is already included in standard version
as CAN-Analyzer tool. It allows monitoring of the CAN-Bus in real time and
supports starting and diagnosis of networks. User is able to see messages
transmitted to the bus as raw CAN-Telegrams (CAN Layer 2) or interpreted as
CANopen message (CAN Layer 7). An optional recording of data transmission
allows an offline analysis afterwards. CANopen DeviceExplorer shows
CAN-Messages with hardware timestamps, generated by SYS TEC electronic
USB-CANmodules. Combined with Process Data Linker plug-in CANopen
DeviceExplorer becomes an all-embracing tool for entire functionalities like
planning, implementing, analysis and debugging.
Extended hardware supportThis software works with the following CAN interfaces:
SYS TEC electronic offers extraordinary hardware support for CAN-Bus interfaces
of various manufacturers. You are not limited to a particular supplier.
- SYS TEC USB-CANmodul1
- PEAK PCAN-USBAdapter
- Kvaser CAN-Interfaces