The CANopenIA-M0 Module allows integration of the CANopenIA-M0-Chip
functions in user’s hardware without taking care about clock generation,
EEPROM hardware and the status and error indication. The module can
easily be implemented in user’s hardware with a two row 48 pin
connector. Components can be placed under the module on the main PCB.
The module includes the COIA-M0 chip, the clock generation, the EEPROM
to store the setup data and two LEDs to signal status and error
information according to the CANopen specification. The connector has
1.27mm grid with two rows of 24 pins each...
The chip implements the CANopen protocol compliant
to the CiA standards
CANopenIA-M0 is based on the NXP Cortex M0 32-bit micro controller. A
derivative with integrated CAN transceiver is used to minimize the
external components needed around the protocol chip. The Cortex
architecture in conjunction with the optimized firmware design results
in a very high performance. Time delays between in our outgoing CAN PDOs
and hardware events are brought down to 15 micro seconds.
- USB to CAN adapter with related software
- CANopenIA-M0 evaluation board with COIA-M0 module and product CD
- Wall power supply and all needed cables for wiring
The evaluation board included in the COIA-M0 starter kit provides:
With the CANopenIA-M0 Setup Tool all features supported by the CANopenIA-M0 chip are configured in a very easy manner.
The setup tool generates a data set to be downloaded to the chip and a
device configuration file which can be read by third party CANopen bus